Operation Manual

High-beam headlamps/daytime run-
ning lamps (halogen headlamps)
X
Switch off the lights.
X
Open the hood.
X
Turn housing cover : counter-clockwise
and pull it out.
X
Turn bulb ; counter-clockwise and pull it
out.
X
Insert the new bulb and engage it to the
stop.
X
Align housing cover : and turn it clock-
wise until it engages.
Turn signals (halogen headlamps)
X
Switch off the lights.
X
Open the hood.
X
Turn bulb holder : counter-clockwise and
pull it out.
X
Take the bulb out of bulb holder :.
X
Insert the new bulb into bulb holder :.
X
Insert bulb holder : and turn it clockwise
until it engages.
Cornering light function (Bi-Xenon
headlamps)
X
Switch off the lights.
X
Open the hood.
X
Turn housing cover : counter-clockwise
and pull it out.
X
Turn bulb holder ; counter-clockwise and
pull it out.
X
Take the bulb out of bulb holder ;.
X
Insert the new bulb into bulb holder ;.
X
Insert bulb holder ; into the lamp and turn
it clockwise.
X
Align housing cover : and turn it clock-
wise until it engages.
Changing the rear bulbs
Opening and closing the side trim pan-
els
You must open the side trim panel in the
cargo compartment before you can change
the bulbs in the tail lamps.
Replacing bulbs
119
Lights and windshield wipers
Z