Operation Manual

Maintenance menu
In the Serv.Serv. menu, you have the following
options:
R
Calling up display messages in message
memory (Y page 221)
R
Restarting the tire pressure loss warning
system (Y page 331)
R
Checking the tire pressure electronically
(Y page 332)
R
Calling up the service due date
(Y page 296)
Settings menu
Introduction
In the Sett.Sett. menu, you have the following
options:
R
Changing the instrument cluster settings
R
Changing the light settings
R
Changing the vehicle settings
R
Changing the convenience settings
R
Restoring the factory settings
Instrument cluster
Selecting the unit of measurement for dis-
tance
You can determine whether the multifunction
display shows some messages in miles or
kilometers.
X
Press the = or ; button on the steer-
ing wheel to select the SettSett menu.
X
Press the : or 9 button to select the
Instrument ClusterInstrument Cluster submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Display Unit Speed-/OdometerDisplay Unit Speed-/Odometer func-
tion.
You will see the selected setting: kmkm or
milesmiles.
X
Press the a button to save the setting.
The selected unit of measurement for dis-
tance applies to:
R
the digital speedometer in the TripTrip menu
R
the odometer and the trip odometer
R
the trip computer
R
the current consumption and the range
R
navigation instructions in the NaviNavi menu
R
cruise control
R
DISTRONIC PLUS
R
ASSYST PLUS service interval display
Switching the additional speedometer
on/off
The Speedometer [km/h]Speedometer [km/h] or SpeedometerSpeedometer
[mph][mph] function allows you to choose whether
the multifunction display in the status area
always shows the speed in km/hkm/h or in mphmph
instead of the outside temperature.
X
Press the = or ; button on the steer-
ing wheel to select the SettSett menu.
X
Press the : or 9 button to select the
Instrument ClusterInstrument Cluster submenu.
X
Press a to confirm.
Menus and submenus
215
On-board computer and displays
Z