Operation Manual

X
To deactivate: press the á button.
The indicator lamp in the á button goes
out.
The temperature setting for the driver's
side is adopted for the front-passenger
side.
Defrosting the windshield
General notes
You can use this function to defrost the wind-
shield or to defrost the inside of the wind-
shield and the side windows.
i
You should only select the "Windshield
defrosting" function until the windshield is
clear again.
Activating/deactivating the defrosting
function for the windshield
X
Turn the SmartKey to position 2 in the igni-
tion lock (
Y page 149).
X
To activate: press the ¬ button.
The indicator lamp in the ¬ button lights
up.
The climate control system switches to the
following functions:
R
high airflow
R
high temperature
R
air distribution to the windshield and
front side windows
R
air-recirculation mode off
i
The "Windshield defrosting" function
automatically sets the blower output to the
optimum defrosting effect. As a result, the
airflow may increase or decrease automat-
ically after the ¬ button is pressed.
i
You can adjust the blower output man-
ually while the "Windshield defrosting"
function is in operation:
R
Air-conditioning system: turn airflow
control A counter-clockwise or clock-
wise (
Y page 133).
R
Dual-zone automatic climate control:
press the ó or ô button.
X
To deactivate: press the ¬ button.
The indicator lamp in the ¬ button goes
out. The previously selected settings are
restored. Air-recirculation mode remains
deactivated.
or
X
Dual-zone climate control: press the Ã
button.
The indicator lamp in the ¬ button goes
out. Airflow and air distribution are set to
automatic mode.
or
X
Air-conditioning system: turn temperature
control : counter-clockwise or clockwise
(
Y page 133).
Dual-zone automatic climate control: turn
temperature control : or E counter-
clockwise or clockwise (
Y page 135).
MAX COOL maximum cooling
The MAX COOL function is only available in
vehicles for the USA.
MAX COOL is only operational when the
engine is running.
X
To activate: press the Ù button.
The indicator lamp in the button lights up.
X
To deactivate: press the Ù button.
The indicator lamp goes out. The previously
selected settings are restored.
When you activate MAX COOL, climate con-
trol switches to the following functions:
R
maximum cooling
R
maximum airflow
R
air-recirculation mode on
Operating the climate control systems
141
Climate control