Operation Manual

Roller sunblind reversing feature
The roller sunblind is equipped with an auto-
matic reversing feature. If a solid object
blocks or restricts the roller sunblind during
the closing process, the roller sunblind opens
again automatically. However, the automatic
reversing feature is only an aid and does not
relieve you of the responsibility of paying
attention when closing the roller sunblind.
G
WARNING
The reversing feature does not react:
R
to soft, light and thin objects, e.g. small fin-
gers
R
when closing the roller sunblind again man-
ually immediately after automatic reversal
This means that the reversing feature cannot
prevent someone being trapped in these sit-
uations. There is a risk of injury.
When closing the roller sunblind, make sure
that no body parts are in the sweep area.
If somebody becomes trapped:
R
release the switch immediately, or
R
press the switch in any direction during the
automatic closing process
The closing process is stopped.
Opening and closing
:
To open
;
To open
=
Closing
X
Turn the SmartKey to position 1 or 2 in the
ignition lock (
Y page 149).
X
Press or pull the 3 switch in the corre-
sponding direction.
If you press/pull the 3 switch beyond the
point of resistance, automatic operation is
started in the corresponding direction. You
can stop automatic operation by pressing/
pulling the switch again.
After opening the panorama roof with power
tilt/sliding panel, the roller sunblind automat-
ically closes slightly. This reduces drafts in
the vehicle interior.
Resetting the panorama roof with
power tilt/sliding panel or the roller
sunblind
Reset the panorama roof with power tilt/slid-
ing panel or the roller sunblind, if the pano-
rama roof with power tilt/sliding panel or the
roller sunblind does not move smoothly.
X
Turn the SmartKey to position 1 or 2 in the
ignition lock (
Y page 149).
X
Pull the 3 button repeatedly to the point
of resistance in the direction of arrow :
until the panorama roof with power tilt/
sliding panel is fully closed.
X
Keep the 3 switch pulled for an addi-
tional second.
X
Pull the 3 switch repeatedly to the point
of resistance in the direction of arrow :
until the roller sunblind is fully closed.
X
Keep the 3 switch pulled for an addi-
tional second.
Panorama roof with power tilt/sliding panel
97
Opening and closing
Z