Operation Manual

477
Practical hints
Replacing wiper blades
Removing
왘 Remove the SmartKey from the starter
switch.
Vehicles with KEYLESS-GO*:
왘 Make sure the vehicle’s on-board
electronics have status 0
(
컄 page 42).
왘 Fold wiper arm 1 away from the rear
window until it engages.
1 Wiper arm
2 Wiper blade
왘 Turn wiper blade 2 to form a right
angle with wiper arm 1 as shown.
왘 Hold wiper arm 1 and disengage wip-
er blade 2 by carefully sliding it in
direction of arrow.
왘 Remove wiper blade 2.
Installing
1 Wiper arm
2 Wiper blade
왘 Insert wiper blade 2 into wiper
arm 1.
왘 Hold wiper arm 1 and engage wiper
blade 2 by pushing it in direction of
arrow until it locks into place.
왘 Check whether the wiper blade is
securely fastened.
왘 Fold the wiper arm to rest on the rear
window.
Make sure to hold on to the wiper when
folding the wiper arm back.
!
Do not pull on the wiper blade insert. It
could tear.