Operation Manual

X
Press memory button M : and one of the
arrows on adjustment button ; within three
seconds.
The parking position is stored if the exterior
mirror does not move.
X
If the mirror moves out of position, repeat the
steps.
Calling up a stored parking position set-
ting
X
Turn the SmartKey to position 2 in the ignition
lock (
Y page 162).
X
Adjust the exterior mirror on the front-
passenger side using button =.
X
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger side
moves back to its original position:
R
as soon as you exceed a speed of 9 mph
(15 km/h)
R
about ten seconds after you have disengaged
reverse gear
R
if you press button ? for the exterior mirror
on the driver's side
Memory function
Important safety notes
G
WARNING
If you use the memory function on the driver's
side while driving, you could lose control of
the vehicle as a result of the adjustments
being made. There is a risk of an accident.
Only use the memory function on the driver's
side when the vehicle is stationary.
G
WARNING
When the memory function adjusts the seat or
steering wheel, you and other vehicle occu-
pants – particularly children – could become
trapped. There is a risk of injury.
While the memory function is making adjust-
ments, make sure that no one has any body
parts in the sweep of the seat or steering
wheel. If somebody becomes trapped, imme-
diately release the memory function position
button. The adjustment process is stopped.
G
WARNING
Children could become trapped if they acti-
vate the memory function, particularly when
unattended. There is a risk of injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
The memory function can be used at any time,
e.g. even when the SmartKey isn't in the ignition
lock.
Storing settings
The memory function is only available in vehicles
with the memory package.
With the memory function, you can store up to
three different settings, e.g. for three different
people.
The following settings are stored as a single
memory preset:
R
seat, backrest, head restraint position and
contour of the backrest in the lumbar region
R
active multicontour seat: side bolsters of the
backrest, shoulder of the backrest, contour of
the backrest, dynamic function level
R
seat heating: distribution of the heated sec-
tions of the seat cushion and backrest
R
driver's side: position of the exterior mirrors
on the driver's and front-passenger sides
126
Memory function
Seats, steering wheel and mirrors