Operation Manual

X
Adjust the seat accordingly (Y page 106).
X
On the driver's side, adjust the steering wheel
(
Y page 120) and the exterior mirrors
(
Y page 123).
X
Press memory button M and one of the stor-
age position buttons 1, 2 or 3 within three
seconds.
The settings are stored in the selected preset
position. A tone sounds when the settings
have been completed.
Calling up a stored setting
X
Press and hold the relevant storage position
button 1, 2 or 3 until the:
R
Seat
R
Steering wheel
R
Exterior mirrors
are in the stored position.
i
If you release the storage position button,
the seat, steering wheel and mirror setting
functions stop immediately. The multicontour
seat setting or the 4-way lumbar support is
still carried out.
Memory function in the rear compart-
ment
Important safety notes
G
WARNING
When the memory function adjusts the seat or
steering wheel, you and other vehicle occu-
pants – particularly children – could become
trapped. There is a risk of injury.
While the memory function is making adjust-
ments, make sure that no one has any body
parts in the sweep of the seat or steering
wheel. If somebody becomes trapped, imme-
diately release the memory function position
button. The adjustment process is stopped.
G
WARNING
Children could become trapped if they acti-
vate the memory function, particularly when
unattended. There is a risk of injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
General notes
The settings for the rear seat and the front-
passenger seat can be stored using the rear-
compartment memory function.
R
If the indicator lamp in the v button is not
lit, store the rear seat settings.
R
If the indicator lamp in the v button lights
up, store the front-passenger seat and rear
seat settings. Both the front-passenger and
rear seat are taken into account with this set-
ting. Depending on the equipment in the vehi-
cle, two or three memory positions can be
stored for the front-passenger and rear seats.
Storing settings
General notes
With the memory function in the rear, you can
store up to three different settings, e.g. for three
different people.
The following settings are stored as a single
memory preset:
R
position of the seat, backrest and head
restraint
R
multicontour seat: the seat cushions of the
backrest as well as the contour of the back-
rest in the lumbar and shoulder regions
R
seat heating: distribution of the heated sec-
tions of the seat cushion and backrest if the
indicator lamp in the v button is not lit
The following settings are stored to a memory
position, if the indicator lamp in the v button
lights up:
R
position of the footrest for the front-
passenger seat, if available
R
position of the screen, if available
Memory function in the rear compartment
127
Seats, steering wheel and mirrors
Z