Operation Manual

Vehicles without rear reclining seat
The SmartKey must be in the ignition lock and in
position 1 or 2, in order for the front-passenger
seat to be selected (
Y page 162).
Selecting a rear-compartment seat
X
Press the v button repeatedly until the
indicator lamp in the button is not lit.
The rear-compartment seat is selected if the
indicator lamp in the button is not lit.
X
Adjust the rear seat accordingly
(
Y page 107).
X
Press memory button M and one of the stor-
age position buttons 1, 2 or 3 within three
seconds.
The settings are stored in the selected stor-
age position.
Selecting the front-passenger seat and rear-
compartment seat
X
Press the v button repeatedly until the
indicator lamp in the button is not lit.
The rear-compartment seat is selected if the
indicator lamp in the button is not lit.
X
Adjust the rear seat accordingly
(
Y page 107).
X
Press the v button repeatedly until the
indicator lamp in the button lights up.
The front-passenger seat is selected if the
indicator lamp in the button lights up.
X
Adjust the front-passenger seat accordingly
(
Y page 108).
X
Press memory button M and one of the stor-
age position buttons 1, 2 or 3 within three
seconds.
The settings are stored in the selected stor-
age position.
Vehicles with a rear reclining seat
The SmartKey must be in the ignition lock and in
position 1 or 2, in order for the front-passenger
seat to be selected (
Y page 162).
Selecting a rear-compartment seat
X
Press the v button repeatedly until the
indicator lamp in the button is not lit.
The rear-compartment seat is selected if the
indicator lamp in the button is not lit.
X
Adjust the rear seat accordingly
(
Y page 107).
X
Press the M memory button and then press
either the 1 or 2 memory button within three
seconds.
The settings are stored in the selected stor-
age position.
Selecting the front-passenger seat and rear-
compartment seat
X
Press the v button repeatedly until the
indicator lamp in the button is not lit.
The rear-compartment seat is selected if the
indicator lamp in the button is not lit.
X
Adjust the rear seat accordingly
(
Y page 107).
X
Press the v button repeatedly until the
indicator lamp in the button lights up.
The front-passenger seat is selected if the
indicator lamp in the button lights up.
X
Adjust the front-passenger seat accordingly
(
Y page 108).
X
Press the M memory button and then press
either the 1 or 2 memory button within three
seconds.
The settings are stored in the selected stor-
age position.
You cannot store any settings on the button for
se
tting the reclined position.
128
Memory function in the rear compartment
Seats, steering wheel and mirrors