Operation Manual

Setting a specified minimum distance
You can set the specified minimum distance for
DISTRONIC PLUS by varying the time span
between one and two seconds. With this func-
tion, you can set the minimum distance that
DISTRONIC PLUS keeps to the vehicle in front,
dependent on vehicle speed. You can see this
distance in the multifunction display
(
Y page 204).
i
Make sure that you maintain the minimum
distance to the vehicle in front as required by
law. Adjust the distance to the vehicle in front
if necessary.
X
To increase: turn control ; in direction =.
DISTRONIC PLUS then maintains a greater
distance between your vehicle and the vehicle
in front.
X
To decrease: turn control ; in direction :.
DISTRONIC PLUS then maintains a shorter
distance between your vehicle and the vehicle
in front.
DISTRONIC PLUS displays in the instru-
ment cluster
Displays in the speedometer
When you switch on DISTRONIC PLUS, trian-
gle ; shows the stored speed.
If DISTRONIC PLUS detects a vehicle in front,
segments between the speed of the vehicle in
front : and stored speed ; light up. The seg-
ments likewise light up if a vehicle in front is
detected in the fast lane.
i
For design reasons, the speed displayed in
the speedometer may differ slightly from the
speed set for DISTRONIC PLUS.
Display when DISTRONIC PLUS is deacti-
vated
:
Vehicle in front, if detected
;
Distance indicator, current distance to the
vehicle in front
=
Specified minimum distance to the vehicle
in front; adjustable
?
Own vehicle
In the Assistance menu (
Y page 269) of the on-
board computer, you can select the assistance
graphics display.
X
Select the Assistance Graphic function
using the on-board computer (
Y page 268).
204
Driving systems
Driving and parking