Operation Manual

The electric motor supports the combustion
engine by providing additional torque when:
R
the needle has exceeded area A
R
you press the haptic accelerator pedal
beyond the pressure point and want to obtain
more power
Operating the on-board computer
You can display the current operating condition
of the hybrid drive system in the multifunction
display and the multimedia system display
(
Y page 245).
In the multimedia system display, you can also
call up a graphic display of the fuel consumption
and generated electricity (
Y page 249).
Menus and submenus
Selecting displays in the display of the
multimedia system
X
Press button Ø on the controller.
The vehicle menu is displayed.
X
To select Energy Flow: turn and press the
controller.
The energy flow is displayed.
or
X
To select Consumption: turn and press the
controller.
Fuel consumption and the generated electric
energy are displayed.
X
To exit the display: press the % button on
the controller.
Selecting the energy flow display in the
multifunction display
X
Use Ñ on the steering wheel to call up the
list of menus.
X
Press the : or 9 button on the steering
wheel to select the Trip
menu.
X
Confirm by pressing a on the steering
wheel.
X
Select Energy Flow with : or 9 .
The active hybrid components are highlighted
in the energy flow display.
Energy flow display
Overview
:
Internal combustion engine
;
Electric motor
=
High-voltage battery condition of charge
?
High-voltage battery
A
Energy flow
The active hybrid components are highlighted.
The energy flow is indicated by arrows. The
arrows have a different color depending on the
operating state.
Automatic engine switch-off
The engine and electric motor are switched off.
The arrows for the energy flow are not shown.
The condition of charge of the high-voltage bat-
tery is shown when the SmartKey is in position 2
in the ignition lock.
PLUG‑IN HYBRID operation
245
Driving and parking
Z