Operation Manual

X
Use : or 9 to select the DriveAssist
submenu.
X
Press a to confirm your selection.
X
Press the : or 9 button to select
Lane Keeping Assist
.
X
Press a to confirm.
The current selection, Standard
or Adap‐
tive, appears.
X
To change the setting: press a again.
For further information about Active Lane Keep-
ing Assist, see (
Y page 237).
HYBRID submenu (PLUG-IN HYBRID
vehicles)
Setting the maximum charge current
Using the Max. Charge Current function, you
can limit the charge current value at which the
high-voltage battery should be charged.
Before starting the charging process at a power
socket, check the maximum permissible charge
current for the relevant power socket or the
building.
Only set the maximum permissible charge cur-
rent using the function if:
R
it is not possible to set the charge current on
the charging cable
R
the precise maximum permitted charge cur-
rent can only be set via the on-board com-
puter
Before charging the high-voltage battery at a
wallbox or charging station, ensure that the
charging current is not limited by the function. If
charging at a wallbox or a charging station,
select the maximum value.
Further information on charging the high-volt-
age battery and setting the charge current
(PLUG-IN HYBRID vehicles) (
Y page 181).
X
Press ò on the steering wheel to open the
menu list.
X
Press : or 9 on the steering wheel to
select the Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Press : or 9 to select the Hybrid
submenu.
X
Press a to confirm.
X
Press : or 9 to select the Max.
Charge Current function.
You will see the selected setting.
X
Press the a button to save the setting.
Before charging the high-voltage battery, check
the maximum permissible charge current for the
relevant power socket.
Further information on charging the high-volt-
age battery (PLUG-IN HYBRID vehicles)
(
Y page 181).
Setting the departure time
You can climatize the vehicle interior prior to
your departure with the "Set departure time"
function. Further information on pre-entry cli-
mate control (
Y page 157).
If you recharge the high-voltage battery, the
function also displays the charging prediction.
X
Press the ò button on the steering wheel
to open the menu list.
X
Press : or 9 on the steering wheel to
select the Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Press : or 9 to select the Hybrid
submenu.
X
Press a to confirm.
X
Press : or 9 to select the Departure
Time function.
You will see the selected setting.
X
Press the a button to save the setting.
X
To set no departure time: press : or
9 to select No Pre-selection
.
X
Press a to confirm.
If you recharge the high-voltage battery, the
multifunction display also shows the time
when the high-voltage battery will be fully
charged.
or
X
To set a departure time: press : or 9
A
, B or C to select the desired preset.
X
Press the a button to confirm the selec-
tion.
X
Press : or 9 to set the hours.
X
Press a to confirm.
X
Press : or 9 to set the minutes.
X
Press a to confirm.
If you recharge the high-voltage battery, the
multifunction display shows the expected
272
Menus and submenus
On-board computer and displays