Operation Manual

condition of charge of the high-voltage bat-
tery for the departure time set.
Further information on charging the high-volt-
age battery (PLUG-IN HYBRID vehicles)
(
Y page 181).
Head-up display submenu
Selecting other displays
:
Vehicle speed display
;
Vehicle speed and navigation instruction
display
=
Vehicle speed display and Traffic Sign Assist
Using the Display Content
function, you can
choose from up to four display options depend-
ing on the vehicle's equipment. The selected
contents appear in the head-up display.
In Mercedes-AMG vehicles, you can also choose
between two AMG displays. If you select an
AMG display, the head-up display shows AMG-
specific contents.
X
Press the ò button on the steering wheel
to open the menu list.
X
Press : or 9 on the steering wheel to
select the Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Press : or 9 to select the Head-up
Display submenu.
X
Press a to confirm.
X
Press : or 9 to select Display Con‐
tent.
X
Press a to confirm.
A graphic selection list appears.
X
Press : or 9 to select the desired dis-
play.
X
Press the a button to confirm the selec-
tion.
For further information about the traffic sign
displays, see Traffic Sign Assist (
Y page 229).
Further information on navigation displays can
be found in the multimedia system; see the sep-
arate operating instructions.
Setting the position
You can adjust the position of the head-up dis-
play on the windshield. You can compensate for
height differences if the seat positions are
changed, for example.
X
Switch on the head-up display (Y page 259).
X
Press the ò button on the steering wheel
to open the menu list.
X
Press the : or 9 button on the steering
wheel to select the Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Press : or 9 to select the Head-up
Display submenu.
X
Press a to confirm.
X
Press : or 9 to select the Position
function.
X
Press the a button to save the setting.
X
Press : or 9 to adjust the position to a
level from Level
+5 (up) to Level -5 (down).
X
Press the a or % button to save the
setting.
Using the Memory function, you can save and
call up the set position of the head-up display as
a single memory preset (
Y page 126).
Setting the brightness
The brightness of the head-up display is auto-
matically adjusted to the surrounding ambient
light. You can also individually adjust the bright-
ness of the head-up display.
X
Switch on the head-up display (Y page 259).
X
Press ò on the steering wheel to open the
menu list.
X
Press the : or 9 button on the steering
wheel to select the Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Use : or 9 to select the Head-up
Display submenu.
X
Press a to confirm.
X
Press : or 9 to select the Brightness
function.
X
Press the a button to save the setting.
Menus and submenus
273
On-board computer and displays
Z