Operation Manual

Display messages
Introduction
General notes
Display messages appear in the multifunction display.
Display messages with graphic displays may be shown in simplified form in the Operator's Manual
and may therefore differ from the multifunction display.
Please respond in accordance with the display messages and follow the additional notes in this
Operator's Manual.
With certain display messages, you will also hear a warning tone.
You can hide the display messages. The display messages are then stored in the message memory.
Rectify the cause of a display message as soon as possible.
When you stop and park the vehicle, please observe the notes on:
R
HOLD function (Y page 208)
R
Parking (Y page 189)
Hiding display messages
X
Press a or % on the steering wheel.
The multifunction display hides the display message.
The multifunction display shows high-priority display messages in red. Some high-priority display
messages cannot be hidden.
The multifunction display shows these messages continuously until the causes for the messages
have been remedied.
Message memory
The on-board computer saves certain display messages in the message memory. You can call up
the display messages:
X
Press the ò button on the steering wheel to open the menu list.
X
Press : or 9 on the steering wheel to select the Service menu.
X
Confirm by pressing a on the steering wheel.
X
Press the : or 9 button to select the message memory.
If there are no display messages, the No
Messages message appears in the multifunction display.
When there are display messages, the number of stored messages appears.
X
Press a to confirm.
X
Press the : or 9 button to scroll through the display messages.
Display messages
277
On-board computer and displays
Z