Operation Manual

Display messages
Possible causes/consequences and M Solutions
ABC Vehicle Rising
Please Wait Briefly
The vehicle level is too low when the vehicle is stationary. A warning
tone also sounds.
X
Do not pull away.
The vehicle level is set when the display message disappears.
ABC Malfunction
The Active Body Control (ABC) function is restricted. The vehicle's
handling characteristics may be affected.
X
Do not drive at speeds above 50 mph (80 km/h).
X
Visit a qualified specialist workshop.
Active Lane Keeping
Assist Currently
Unavailable See
Operator's Manual
Active Lane Keeping Assist is deactivated and temporarily inoperative.
Possible causes are:
R
the windshield in the camera's field of vision is dirty.
R
visibility is impaired due to heavy rain, snow or fog.
R
there have been no lane markings for an extended period.
R
the lane markings are worn, dark or covered, e.g. by dirt or snow.
When the causes stated above no longer apply, the display message
disappears.
Active Lane Keeping Assist is operational again.
If the display message does not disappear:
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X
Secure the vehicle against rolling away (Y page 189).
X
Clean the windshield.
Active Lane Keeping
Assist Inoperative
Active Lane Keeping Assist is defective.
X
Visit a qualified specialist workshop.
Active Blind Spot
Assist Currently
Unavailable See
Operator's Manual
Active Blind Spot Assist is temporarily inoperative.
Possible causes are:
R
the radar sensor system is outside the operating temperature
range.
R
the radar sensor system is temporarily inoperative, e.g. due to elec-
tromagnetic radiation emitted by nearby TV or radio stations or
other sources of electromagnetic radiation.
When the causes stated above no longer apply, the display message
disappears.
Active Blind Spot Assist is operational again.
If the display message does not disappear:
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X
Secure the vehicle against rolling away (Y page 189).
X
Restart the engine.
Active Blind Spot
Assist Inoperative
Active Blind Spot Assist is defective.
X
Visit a qualified specialist workshop.
Display messages
301
On-board computer and displays
Z