Operation Manual

Vehicles with electrically adjustable rear
bench seats
X
Fold down the rear seat armrest.
X
To open: press down base ; of the cup
holder in the middle until it engages.
X
To close: press closing button :.
Base ; of cup holder pops up.
The cup holder insert can be removed for clean-
ing. Clean with clear, lukewarm water only.
!
Please do not pull out the cup holder insert
any further than 15 mm. Otherwise, the
wooden trim on the rear seat armrest could be
damaged.
X
To remove the insert: press down base = of
the cup holder in the middle until it engages.
X
Press both retaining clips ; and pull the cup
holder insert upwards approximately 15 mm.
X
Press button :.
Base = of cup holder pops up.
X
Remove the insert from the rear seat armrest
completely.
!
Make sure that the cup holder insert has
been inserted into the recess correctly. Oth-
erwise, the wooden trim on the rear seat arm-
rest could be damaged.
X
To install the insert: make sure that base ;
of the cup holder is in the upper position.
X
Place the cup holder insert into the recess in
the rear seat armrest such that button : is
facing forwards.
X
Press the cup holder insert down.
X
Press outer ring = of the cup holder insert,
until the cup holder insert engages audibly.
Temperature controlled cup holder in
the rear compartment
Example: Sedan
:
Cup holder
;
Switch
The temperature-controlled cup holder can be
used to keep cold drinks cool and warm drinks
warm.
When you use the warming function, the metal
insert of the cup holder is heated. Therefore, do
not touch the cup holder insert.
X
Turn the SmartKey to position 2 in the ignition
lock (
Y page 162).
X
To switch on the cooling function: press
and hold button ; until the blue indicator
lamp on the button lights up.
332
Features
Stowage and features