Operation Manual

The jacking points are located just behind the
front wheel housings and just in front of the rear
wheel housings (arrows).
X
Take the ratchet wrench out of the vehicle
tool kit and place it on the hexagon nut of the
jack so that the letters AUF are visible.
Mercedes-AMG vehicles and vehicles with
AMG equipment: to protect the vehicle body,
the vehicle has covers installed next to the jack-
ing points on the outer sills.
X
Mercedes-AMG vehicles and vehicles
with AMG equipment: fold cover ?
upwards.
X
Position jack B at jacking point A.
X
Make sure the foot of the jack is directly
beneath the jacking point.
X
Turn ratchet wrench C until jack B sits
completely on jacking point A and the base
of the jack lies evenly on the ground.
X
Turn ratchet wrench C until the tire is raised
a maximum of 1.2 in (3 cm) from the ground.
Removing a wheel
!
Mercedes-AMG vehicles: during removal
and repositioning of the wheel, the wheel rim
can strike the ceramic-brake disc and dam-
age it. Therefore, you should proceed care-
fully and get a second person assist to you.
Alternatively, you can use a second alignment
bolt.
!
Do not place wheel bolts in sand or on a dirty
surface. The bolt and wheel hub threads could
otherwise be damaged when you screw them
in.
When mounting/removing wheels, and for as
long as the wheels are removed, avoid applying
any external force on the brake disks. This could
impair the level of comfort when braking.
408
Changing a wheel
Wheels and tires