Operation Manual

Automatic locking feature
X
To deactivate: press and hold button : for
approximately five seconds until a tone
sounds.
X
To activate: press and hold button ; for
approximately five seconds until a tone
sounds.
If you press one of the two buttons and do not
hear a tone, the relevant setting has already
been selected.
The vehicle is locked automatically when the
ignition is switched on and the wheels are turn-
ing.
You could therefore be locked out if:
R
the vehicle is being pushed.
R
the vehicle is being towed.
R
the vehicle is on a roller dynamometer.
You can also switch the automatic locking func-
tion on and off using the multimedia system; see
the separate operating instructions.
Power closing
Power closing pulls the doors and trunk lid into
their locks automatically even if they are only
partly closed.
X
To power close a door: push the door into
the lock up to the first detent position.
Power closing will pull the door fully closed.
X
To power close the trunk lid: lightly push
the trunk lid closed.
The power closing function pulls the trunk lid
closed.
Unlocking the driver's door (mechan-
ical key)
If the vehicle can no longer be locked or
unlocked with the SmartKey or KEYLESS-GO,
use the mechanical key.
X
Take the mechanical key out of the SmartKey
(
Y page 81).
X
Insert the mechanical key as far as it will go
into opening : in the protective cap.
X
Pull and hold the door handle.
X
Pull the protective cap on the mechanical key
as straight as possible away from the vehicle
until it releases.
X
Release the door handle.
X
Insert the mechanical key into the lock of the
driver's door as far as it will go.
X
Turn the mechanical key counter-clockwise
as far as it will go to position 1.
The locking knob pops up and the door
unlocks.
X
Turn the mechanical key back and remove it.
X
Insert the mechanical key into the SmartKey
(
Y page 82).
X
Carefully press the protective cap onto the
lock cylinder until it engages and is seated
Doors
87
Opening and closing
Z