Operation Manual

164
Controls in detail
Control system
Setting locator lighting
With the locator lighting feature activated
and the exterior lamp switch in
position U, the following lamps will
switch on during darkness when the
vehicle is unlocked using button Πon
the SmartKey or SmartKey with
KEYLESS-GO*:
앫 Parking lamps
앫 Tail lamps
앫 License plate lamps
앫 Front fog lamps
앫 Side marker lamps
The locator lighting switches off when the
driver’s door is opened.
If you do not open a door after unlocking
the vehicle with the SmartKey, the lamps
will switch off automatically after approxi-
mately 40 seconds.
왘 Move the selection marker with
button æ or ç to the
Lighting
submenu.
왘 Press button j or k repeatedly
until the message
Locator Lighting
appears in the multifunction display.
The selection marker is on the current
setting.
왘 Press button æ or ç to switch
the locator lighting feature
On or Off .
왘 Turn the exterior lamp switch to
position U when exiting the vehicle.
The locator lighting feature is
activated.
Setting night security illumination
(Headlamps delayed switch-off feature)
Use this function to set whether you would
like the exterior lamps to remain on for
15 seconds during darkness after exiting
the vehicle and closing the doors.
With the headlamps delayed switch-off
feature activated and the exterior lamp
switch in position U before the engine
is turned off, the following lamps will
switch on when the engine is turned off:
앫 Parking lamps
앫 Tail lamps
앫 License plate lamps
앫 Side marker lamps
앫 Front fog lamps
If after turning off the engine you do not
open a door or do not close an opened
door, the lamps will switch off auto-
matically after 60 seconds.