Operation Manual

170
Controls in detail
Control system
Which messages will appear in the right
multifunction display depends on whether
your telephone is switched on or off:
앫 If the telephone is off, the message in
the multifunction display is:
TEL OFF .
앫 If the telephone is on:
The telephone will then search for a
network. During this time the right mul-
tifunction display is empty.
As soon as the telephone has found a
network,
READY is indicated in the right
multifunction display.
앫 This standby message indicates that
your telephone is ready for use and you
can operate it using the control
system.
Answering a call
When your telephone is ready to receive
calls, you can answer a call at any time.
In the right multifunction display you will
then see the message or, if available, the
caller ID (name and number):
왘 Press button s.
You have answered the call.
The duration of the call appears in the
right multifunction display.
Ending a call or rejecting an incoming
call
왘 Press button t.
Dialing a number from the phone book
If your telephone is ready to receive calls,
you may select and dial a number from the
phone book at any time.
왘 Press button ÿ or è repeatedly
until the
TEL menu appears in the left
multifunction display.
In the right multifunction display you
will see the standby message.