Operation Manual

171
Controls in detail
Control system
왘 Press button j or k.
The control system reads the phone
book which is stored in the telephone.
This may take several minutes. In the
right multifunction display the message
Please Wait appears.
When the message
Please Wait
disappears, the phone book has been
loaded.
왘 Press button j or k repeatedly
until the desired name appears in the
right multifunction display.
The stored names are displayed in
ascending or descending alphabetical
order.
왘 Press button s.
The system dials the selected phone
number.
앫 If the connection is successful and this
feature is supported by your network
provider, the name of the party you are
calling (if stored in your phone book)
and the duration of the call will appear
in the multifunction display.
앫 If no connection is made, the control
system stores the dialed number in the
redial memory.
Redialing
The control system stores the most
recently dialed phone numbers. This elimi-
nates the need to search through your
entire phone book.
왘 Press button ÿ or è repeatedly
until the
TEL menu appears in the left
multifunction display.
In the right multifunction display you
will see the standby message.
왘 Press button s.
In the right multifunction display you
see the first number in the redial mem-
ory.
왘 Press button j or k repeatedly
until the desired name appears in the
right multifunction display.
왘 Press button s.
The control system dials the selected
phone number.
i
If you press and hold j or k for
longer than one second, the system scrolls
rapidly through the list of names until you
release the button again.
Cancel the quick search mode by pressing
button t.