Operation Manual

231
Controls in detail
Driving systems
The vehicle chassis ride height is raised or
lowered according to the selected level
setting and to the vehicle speed:
앫 With increasing speed, ride height is
reduced by up to approximately
0.5 inch (12 mm).
앫 With decreasing speed, the ride height
is again raised to the selected vehicle
level.
The following vehicle level settings can be
selected when the vehicle is stationary:
Select the level 1 and level 2 settings only
when required by current driving condi-
tions. Otherwise:
앫 Fuel consumption may increase.
앫 Handling may be impaired.
The ABC vehicle level control button with
the indicator lamps is located in the lower
section of the center console.
1 Indicator lamp
2 Indicator lamp
3 ABC vehicle level control button
i
These height adjustments are so small that
you may not notice any change.
Vehicle
level
Use for Indicator
lamps
Normal For driving on nor-
mal roads.
Both
lamps off
Level 1 For driving on
rough roads or with
snow chains
(
컄 page 329).
One
lamp on
Level 2 For driving on very
rough road surface
conditions.
Both
lamps on
i
The selected vehicle level setting remains
stored in memory, even if the engine is turned off
and restarted.