Operation Manual

361
Practical hints
What to do if …
Text messages
Left display Right display Possible cause/consequence Possible solution
Check tires,
then restart
Run Flat Indicator
.
There was a warning message about a
loss in the tire inflation pressure and
the Run Flat Indicator has not been
restarted yet.
왘 Make sure that the correct tire inflation
pressure is set for each tire.
왘 Then restart the Run Flat Indicator.
Tire Pressure
Check Tires
The Run Flat Indicator indicates that
the pressure is too low in one or more
tires.
왘 Carefully bring the vehicle to a halt, avoid-
ing abrupt steering and braking maneu-
vers. Observe the traffic situation around
you.
왘 Check and adjust tire inflation pressure as
required (
컄 page 302).
왘 If necessary, change the wheel
(
컄 page 417).
왘 Restart the Run Flat Indicator after adjust-
ing the tire inflation pressure values
(
컄 page 304).
ABC Malfunction
Stop Car
You have started driving although the
vehicle level is still too low.
The vehicle is being raised. The ABC
message goes out after a few seconds.
왘 Stop your vehicle in a safe location or as
soon as it is safe to do so.
왘 Wait until the message disappears from
the multifunction display.
You may then drive off.