Operation Manual

412
Practical hints
Replacing bulbs
4 High beam bulbs
5 Locking mechanism
6 Parking and standing lamps
Front turn signal bulb
왘 Turn bulb socket 1 (컄 page 411)
counterclockwise and pull it out.
왘 Push the bulb into socket 1, turn
socket 1 counterclockwise and
remove it.
왘 Insert the new bulb in bulb socket 1,
push and turn bulb socket 1 clock-
wise.
왘 Reinsert bulb socket 1 in lamp hous-
ing and turn bulb socket 1 clockwise.
High beam/high beam flasher bulbs
왘 Press ends of headlamp cover tab
together and remove high beam head-
lamp cover 2 (
컄 page 411).
왘 Pull the electrical connector off.
왘 Turn locking mechanism 5 counter-
clockwise and take out the bulb.
왘 Insert the new bulb so that the base
locates in the recess on the holder.
왘 Turn locking mechanism 5 clockwise.
왘 Plug the connector onto the bulb.
왘 Align high beam headlamp cover 2
and click it into place.
Warning! G
Do not remove the cover for the Xenon or
Bi-Xenon* headlamp. Because of high
voltage in Xenon and Bi-Xenon* lamps, it is
dangerous to replace the bulb or repair the
lamp and its components. We recommend
that you have such work done by a qualified
technician.