Operation Manual
416
Practical hints
Replacing wiper blades
Vehicles with KEYLESS-GO*
왘 Turn off the engine (컄 page 64).
With the driver’s door closed, the
starter switch is now in position 1.
왘 Turn combination switch to wiper
setting II (
컄 page 58).
왘 With wiper arms in the vertical position,
open the driver’s door.
The starter switch is set to position 0,
same as SmartKey removed from
starter switch.
왘 Turn combination switch to wiper
setting 0 (
컄 page 58).
Removing wiper blades
왘 Fold the wiper arm forward until it
snaps into place.
왘 Turn wiper blade at a right angle to the
wiper arm.
왘 Slide the wiper blade sideways out of
the retainer.
Installing wiper blades
왘 Slide the wiper blade onto the wiper
arm in opposite direction of arrow.
왘 Rotate the wiper blade into a position
parallel to the wiper arm.
왘 Fold the wiper arm backward to rest on
the windshield. Make sure you hold on
to the wiper when folding the wiper arm
back.
!
Do not pull on the wiper blade inserts. They
could tear.
!
Make sure the wiper blades are properly
installed. Improperly installed wiper blades may
cause windshield damage.