Operation Manual

X
Search for an entry in the phone book on
the mobile phone d (
Y page 394).
X
Select the list symbol to the right of the
entry by sliding VY the COMAND control-
ler and press W to confirm.
X
Select Save Entry and press W to con-
firm.
The Data saved message appears. The
phone book entry is now saved as an
address book entry.
The d symbol is replaced by the ¥ sym-
bol.
Importing contacts
Information and requirements
You can import contacts (vCards) from the
memory card and a USB device into the
address book, or receive vCards via Blue-
tooth
®
.
i
Up to 2500 entries can be imported into
the address book. A message notifies you
when the maximum number is reached.
You then have to delete existing entries in
order to import new entries (
Y page 404).
Depending on the source of the contact data,
different requirements apply:
Source Prerequisites
Memory card The SD memory card is
inserted (
Y page 447). It
contains importable con-
tact details.
USB device The USB device is inserted
into the USB port
(
Y page 447). It contains
importable contact details.
Requirements for receiving vCards via
Bluetooth
®
You can receive vCards from devices (e.g.
from a PC) that support the sending of vCards
via Bluetooth
®
.
It is not necessary to authorize the device in
COMAND to do so.
Please bear the following in mind:
R
Bluetooth
®
must be activated in COMAND
and on the Bluetooth
®
device; see the oper-
ating instructions for the device.
R
the Bluetooth
®
device must be able to send
vCards via Bluetooth
®
(see operating
instructions for the device).
R
the Bluetooth
®
device in the vehicle must
be switched on.
Importing from the memory card or USB
device
Entries imported from the memory card or
from a USB device have the ¯ symbol.
The following conditions must be fulfilled in
order to import vCards:
R
vCards (vcf files) may be located in the main
directory or in folders. COMAND allows you
to select the relevant folders directly.
R
vCards must have the file extension ".vcf".
i
One vcf file may contain several vCards.
COMAND supports vCards in versions 2.1
and 3.0.
X
Select Address Book in the address book
or, if the telephone basic menu is shown,
select Phone
by sliding VÆ and turning
cVd the COMAND controller and press W
to confirm.
X
Select Download Contacts and press W
to confirm.
A menu appears.
X
Select From The Memory Card or From
USB Device in the menu by turning cVd
the COMAND controller and press W to
confirm.
X
Select Add or Overwrite and press W to
confirm.
Add
imports the entries from the memory
card or USB device into the address book.
Overwrite
imports the entries from the
memory card or USB device and overwrites
408
Telephone
COMAND