Operation Manual

X
Select Menu Language or Audio Lan‐
guage and press W to confirm.
In both cases, a menu appears after a few
seconds. The # dot in front of an entry indi-
cates the currently selected language.
X
Select a setting by turning cVd the
COMAND controller and press W to con-
firm.
Subtitles and camera angle
These functions are not available on all DVDs.
The number of subtitle languages and camera
angles available depends on the content of
the DVD. It may also be possible to access the
settings from the DVD menu.
X
Show the DVD menu (Y page 478).
X
Select DVD-Video in the menu by turning
cVd the COMAND controller and press W
to confirm.
X
Select DVD Functions and press W to
confirm.
X
Select Subtitles or Camera Angle and
press W to confirm.
In both cases, a menu appears. The # dot in
front of an entry indicates the current set-
ting.
X
Select a setting by turning cVd the
COMAND controller and press W to con-
firm.
Interactive content
DVDs can contain interactive content (e.g. a
video game). In a video game, for example,
you may be able to influence events by select-
ing and triggering actions. The type and num-
ber of actions depend on the DVD.
X
Select an action by sliding ZVÆ or XVY the
COMAND controller and press W to exe-
cute it.
A menu appears and the first entry, Select
,
is highlighted.
X
Press W the COMAND controller.
Video AUX mode
Connecting external video sources
External video sources may have different
volumes, which can mean that system mes-
sages such as traffic announcements and
navigation system announcements are much
louder. If necessary, deactivate the system
messages or adjust their volume manually.
If your vehicle is equipped with Media Inter-
face, you can connect an external video
source (AUX video) (
Y page 467).
The 1/8 inch audio/video jacks are in the
center console stowage compartment.
i
In vehicles with a rear view camera, the
AUX video jack cannot be used for external
video sources.
Switching to AUX video mode
AUX video mode
X
Press the h function button repeatedly
until Media Interface mode is selected.
or
X
Select Video in the main function bar by
turning cVdthe COMAND controller and
press W to confirm.
If AUX video mode was the last mode selec-
ted, it will now be active.
If another video source is switched on, you
can now switch to AUX video mode in the
video menu.
480
Video
COMAND