DESK ASSEMBLY 1. 2. INSTRUCTIONS 3. 4. 5. METAL SIDE PANEL SUPPORT STRETCHER L METAL TOP BOARD 2PCS 2PCS 1PC 3PCS 1PC 6. 7. 8. 9. 10. BOTTOM BOARD LEFT SIDE PANEL RIGHT SIDE PANEL MIDDLE PANEL BACK PANEL 1PC 1PC 1PC 1PC 1PC 11. 12. 13. 14. 15. DRAWER FRONT LEFT 1PC DRAWER FRONT DRAWER BACK DRAWER SIDE DRAWER BOTTOM RIGHT 1PC BOARD 2PCS BOARD 2PCS BOARD 4PCS BOARD 2PCS A. B. METAL GLIDE L 2PCS / R C. E.
*** Do not tighten screws & bolts until the entire unit is completely assembled. *** STEP 1 Drawer Assembly Attach drawer side boards (14) to drawer back boards (13) using screws (I). I I 13 14 I I Insert drawer bottom boards (15) along the grooves of drawer side boards (14). 14 13 14 14 15 Attach drawer front boards (12) to drawer side boards (14) using screws (I). I I 12 I L Attach knobs (C) to Left/Right drawer front panel (11) using Philips head bolts (L).
STEP 2 C N O Attach wood dowels (D) with Glue (O) to top board (5) as shown. D D D D D D D D 5 D STEP 3 D D D 7 D 9 D 8 D Attach wood dowels (D) using glue (O) to panels (7)(8)(9) as shown. STEP 4 D D D 10 D Attach left side panel (7), right side panel (8), and middle panel (9) to top board (5) and secure the panels by wood dowels (D) with glue (O). D D D Using wood dowels (D) with glue (O) again to secure back panel (10).
STEP 5 M4 M Attach L metal (4) to side panels (7), (8) and (9) using screws (M). M M M 7 M 9 8 H STEP 6 H H H 6 H H 7 Attach bottom panel (6) to side panels (7), (8) and (9) using screws (H). 9 8 STEP 7 F 2 F F F 2 Attach supports (2) to bottom board (6) using bolts (F).
B STEP 8 B Attach metal side panels (1) to supports (2) using bolts (E), and then, attach stretcher (3) to side panels (1) using bolts (G) as shown. B B Attach levelers (B) to the bottom of metal side panels (1). E G E 3 G E E STEP 9 Carefully, turn the assembled unit upright. N N N 11(L) N 11(R) Line up the metal glides and insert the assembled right drawer box and left drawer box to the desk drawer frames as shown. Use caps (N) to cover bolts (E),(G).