.5hr APPROXIMATE ASSEMBLY TIME •• 2 PERSON ASSEMBLY REQUIRED ASSEMBLY TOOLS PHILLIPS SCREWDRIVER '' HAMMER 1 / 16 FLOOR AREA 2Mx2M REQUIRED ASSEMBLY SPACE FLAT HEAD SCREWDRIVER
Tips before you start: 1. Please check that all parts are present before you start the assembly of your furniture. 2. For ease and speed of assembly, we recommend that before you commence each step of the assembly, that you identify all the parts required for that step. 3. For larger items, please ensure that you have sufficient space and people (as indicated on page 1) to assemble your product safely. 4.
QUICKFIT Panel Tighten quickfit until shoulder is flush with panel. Do not overtighten or undertighten. CAM LOCK WRONG CORRECT When fitting cam lock, ensure starting position is correct before you insert connecting quickfit. Quickfit head should be in the centre of the cam lock when the two panels are joined. Cam lock should be inserted before quickfit. Turn cam lock clockwise to tighten.
28 2 4 x R W asher DR DL CL CR 6 S x 1 Adjustable Feet 2 2xT
6 PCS 6 PCS 6 PCS 6 PCS 6 PCS 6 PCS 16
STEP 1 Insert quickfit screws (A) to part 1, as shown. Fix handle (D) to part 1 using bolts (E), as shown. STEP2 Attach parts 2, 4 and 5 to part 3 using screws (C), as shown. Slide part 6 into available slot of parts 2, 3 and 4, as shown.
A A A DR DL DL DR DR DL DR
CL CR CR CL CR CR CR CR F CL CL CL CL CR CL CR CR CR CR CL CL CL CL
Sx1 12 by rotating clockwise into part 10 as shown. Fix the adjustable feet (S) to the legs if need.
&16 16
&16 16
STEP10 Insert wooden dowels (M) into assembled unit, as shown. Attach part 10 into assembled unit using screws (C), as shown. ..
STEP 11 Insert quickfit screws (A) and wooden dowels (M) into part 14, as shown. Add cam locks (B) into assembled unit as shown and attach part 14 to assembled unit. Turn cam locks clockwise to tighten.
28 6
TR 2 2 2 Rx4 T T T Tx2
WALL FIXING GUIDE NOTE: Supplied wall plugs are only suitable for use in masonry walls. If you have any doubts about using the correct plug for your wall, please seek professional advice. Failure of the product due to using incorrect fixings is the responsibility of the installer. /i\ IMPORTANT: l.l..) When drilling into walls, always check for hidden wires or pipes, etc. /i\ l.l..) Tips & Tricks Make sure that the hardware used is suitable for supporting your unit.