Service manual

181 CID (3.0L) 4 CYLINDER GM ENGINE
SERVICE MANUAL NUMBER 26
90-861329--1 MARCH 1999 Page 3A-57
11. Install as outlined:
a. Timing chain and sprocket on camshaft - align marks with crankshaft.
b. Timing chain cover.
c. Oil pump.
d. Dipstick tube and oil pan.
e. Spark plugs.
f. Torsional damper and crankshaft pulley.
g. Water pump.
h. Belts.
i. Flywheel and drive coupler.
j. Flywheel housing.
k. Starter.
12. Install new oil filter. Fill crankcase with oil.
Crankshaft Sprocket
Removal
1. Remove torsional damper and crankcase front cover as previously outlined.
2. Remove camshaft timing chain as outlined, and using crankshaft gear and sprocket
puller (J-5825-A), remove crankshaft sprocket.
Installation
1. Using crankshaft gear and sprocket installer, as shown, install sprocket on crankshaft.
72377
a
a-Crankshaft Gear and Sprocket Installer (J-5590)
2. Install timing chain as outlined.
3. Install crankcase cover and torsional damper as outlined.
Index