Service manual

STARTING SYSTEM
SERVICE MANUAL NUMBER 26
90-861329--1 MARCH 1999 Page 4A-3
Battery
Battery Cold Cranking Amperage
3.0L 375 cca, 475 mca, 90Ah
Battery Cable Recommendations
IMPORTANT: Terminals must be soldered to cable ends to ensure good electrical
contact. Use electrical grade (resin flux) solder only. Do not use acid flux solder, as
it may cause corrosion and failure.
Cable Length
Cable Gauge
Up to 3-1/2 ft (1.1 m) 4 (25 mm
2
)
3-1/2 - 6 ft (1.1-1.8 m) 2 (35 mm
2
)
6 - 7-1/2 ft (1.8-2.3 m) 1 (50 mm
2
)
7-1/2 - 9-1/2 ft (2.3-2.9 m) 0 (50 mm
2
)
9-1/2 - 12 ft (2.9-3.7 m) 00 (70 mm
2
)
12 - 15 ft (3.7-4.6 m) 000 (95 mm
2
)
15 - 19 ft (4.6-5.8 m) 0000 (120 mm
2
)
Both positive (+) and negative (–) cables
INDEX