Service manual

STARTING SYSTEM SERVICE MANUAL NUMBER 26
Page 4A-14 90-861329--1 MARCH 1999
Starter Motor Repair
Removal
WARNING
Disconnect battery cables at battery before removing starter.
1. Disconnect battery cables from battery.
2. Disconnect wires from solenoid terminals.
IMPORTANT: Some starter motors may use a special mounting shim for gaining fly-
wheel clearance. Do not lose this shim; it will be needed when remounting starter on
engine block.
3. Remove starter mounting bolts.
4. Pull starter assembly away from flywheel and remove from engine.
74523
a
a-Starter Bracket (If So Equipped)
Disassembly
1. Remove brush lead from solenoid and screws from end frame.
74041
a
b
a-Brush Lead
b-Screws
INDEX