Service manual

STARTING SYSTEM
SERVICE MANUAL NUMBER 26
90-861329--1 MARCH 1999 Page 4A-15
2. Remove through bolts and separate end frame from field frame and end cap.
74040
a
b
c
a-End Cap
b-Through Bolt
c-Drive Housing
3. Remove brush holder from end cap.
74037
a
b
c
a-Brush Holder
b-End Cap
c-Screws (2)
4. Remove armature and field frame from drive housing.
5. Pull armature out of field frame.
NOTE: Permanent magnets inside field frame will be holding armature in place.
74086
b
a
a-Armature
b-Field Frame
INDEX