Service manual

STARTING SYSTEM SERVICE MANUAL NUMBER 26
Page 4A-22 90-861329--1 MARCH 1999
INSTALLATION
1. Using the correct size driver, press bearing into housing, from direction shown, to depth
specified.
72626
a
b
a-Depth - .009-.017 in. (0.25-0.45 mm)
b-Installation Direction
2. Lubricate bearing with a small amount of Quicksilver 2-4-C Marine Lubricant with Teflon.
Brushes and Brush Holder
INSPECTION
Replace brushes and holder when brush leads are touching guide.
Make sure brushes move freely in guides.
72069
b
a
a-Brush Leads
b-Guide
REMOVAL
1. Remove armature bearing as previously described.
2. Remove brush holder.
INDEX