Service manual

STARTING SYSTEM SERVICE MANUAL NUMBER 26
Page 4A-40 90-861329--1 MARCH 1999
f. Assemble thrust collar on shaft with shoulder next to snap ring.
g. Position retainer and thrust collar next to snap ring. Then, using two pliers, grip
retainer and thrust collar and squeeze until snap ring is forced into retainer.
72074
b
a
c
a-Retainer
b-Thrust Collar
c-Snap Ring
5. Install the planetary gears on planetary shaft.
6. Install solenoid arm, metal disc and rubber grommet in the drive housing.
NOTE: Solenoid arm is designed to fit only one way. Do not use force.
75821
a
b
c
d
a-Rubber Grommet
b-Metal Disc
c-Solenoid Arm
d-Drive Housing
INDEX