Service manual

STARTING SYSTEM SERVICE MANUAL NUMBER 26
Page 4A-42 90-861329--1 MARCH 1999
10. Install field frame over armature. Align slot in field frame with rubber grommet.
75821
b
c
a
a-Armature
b-Field Frame Slot
c-Rubber Grommet
11. Install field frame and end frame in drive housing.
12. Install long screws and brush lead. Tighten fasteners securely.
75821
e
a
c
b
d
a-End Frame
b-Field Frame
c-Drive Housing
d-Long Screws
e-Brush Lead
Starter Solenoid
TESTING / REPLACEMENT
Pinion clearance must be checked after reassembly of starter motor.
1. Disconnect brush lead from solenoid motor and insulate it carefully.
74041
a
a-Brush Lead
2. Connect 12 volt battery positive (+) lead to battery terminal and negative (–) lead to
frame.
INDEX