Service manual

IGNITION SYSTEM SERVICE MANUAL NUMBER 26
Page 4B-14 90-861329--1 MARCH 1999
4. Repeat Step 3 with ohmmeter connected to GREEN lead. Reading should be infinite.
If not, replace pickup coil.
5. Set ohmmeter to “Rx100” scale. Connect ohmmeter to GREEN and WHITE pickup coil
leads. Reading should be constant, unchanging value in the range of 500-1500 ohms.
If not, replace pickup coil. Be certain to flex leads by hand during this test to locate pos-
sible intermittent “open” circuits (loss of continuity). If any exist, replace pickup coil.
Index