Service manual

CHARGING SYSTEM
SERVICE MANUAL NUMBER 26
90-861329--1 MARCH 1999 Page 4C-17
13. Remove the three Phillips head screws and lockwashers which secure the front bearing
retaining plate.
72829
b
a
a-Phillips Head Screws and Lockwashers
b-Front Bearing Retaining Plate
14. Remove front bearing from front end frame using an arbor press and a suitable size
mandrel. Discard bearing.
72830
a
b
c
a-Press
b-Mandrel
c-Bearing
15. If rotor slip rings or rear bearing requires replacement, entire rotor must be replaced.
Parts cannot be purchased separately.
INDEX