Manualshelf

Service manual

ManualsBrandsMerCruiser ManualsAutomotiveGM4
251252253254255256257258259260
CHARGING SYSTEM
SERVICE MANUAL NUMBER 26
90-861329--1 MARCH 1999 Page 4C-23
CONDENSER
1. Using magneto analyzer and accompanying instructions, perform the following
condenser tests:
a. Condenser Capacity Test (must be .5 mfd).
b. Condenser Short or Leakage Test.
c. Condenser Series Resistance Test.
2. Replace condenser if test results are not within specifications.
Reassembly
1. Install new front bearing into front end frame bearing bore using an arbor press. If neces-
sary, use a bearing driver that contacts outer race only.
72835
b
a
a-Press
b-Mandrel
2. Install front bearing retaining plate using three Phillips head screws and lockwashers.
72829
a
b
a-Phillips Head Screws and Lockwashers
b-Front Bearing Retaining Plate
3. Slide front end frame over rotor.
INDEX