Service manual

CHARGING SYSTEM SERVICE MANUAL NUMBER 26
Page 4C-26 90-861329--1 MARCH 1999
10. Install brush/regulator assembly in rear end frame cavity and secure with two mounting
screws, as shown. Tighten screws securely. Remove drill bit to release brushes against
slip rings.
72837
a
b
a-Brush/Regulator Assembly
b-Mounting Screws
11. Install tie strap to rectifier stud and stud on brush/rectifier assembly. Tighten nuts
securely.
72823
b
a
a-Studs
b-Tie Strap
INDEX