Service manual

INSTRUMENTATION
SERVICE MANUAL NUMBER 26
90-861329--1 MARCH 1999 Page 4D-5
Gauges
Oil, Fuel and Temperature
IMPORTANT: If testing proves gauge to be defective, it must be replaced as there is
no repair available.
TESTING
1. Turn ignition switch to OFF.
2. Remove wire from terminal S (SEND).
72965
a
Typical
a-Sender Terminal
3. Turn ignition switch to RUN. Gauge being tested must be at position A.
72747
Typical Position A
4. Turn ignition switch to OFF.
IndexIndex