Service manual

FUEL PUMP
SERVICE MANUAL NUMBER 26
90-861329--1 MARCH 1999 Page 5A-3
Torque Specifications
Description lb-ft Nm
Fuel Inlet and Outlet
Fittings
Tighten finger tight then 1-3/4 to 2-1/4 additional turns
with wrench. (See Note)
Fuel Line to Fuel Outlet
Fitting
Securely
Fuel Pump to Block 20 27
NOTE: Apply #592 Loctite Pipe Sealant with Teflon. Do not use Teflon Tape.
Tools
Description Part Number
Fuel Pressure Gauge 91-16850A2
Lubricants/Sealants
Description Part Number
Quicksilver Perfect Seal 92-34227--1
Quicksilver Needle Bearing Grease 92-825265A1
Loctite Pipe Sealant with TEFLON Obtain Locally
Specifications
Type of Fuel Pump Carter
Pump Pressure (1800 rpm) 5-1/4 - 6-1/4 PSI (36-44 kPa)
Index