Service manual

FUEL PUMP
SERVICE MANUAL NUMBER 26
90-861329--1 MARCH 1999 Page 5A-7
Replacement
NOTICE
Refer to “Precautions,” in this section, BEFORE proceeding.
1. Disconnect battery cables from battery.
2. Remove fuel filter from base. A filter wrench may be needed to loosen element.
3. Lubricate sealing ring(s) of new filter with SAE engine oil.
4. Install new filter, tightening securely by hand.
5. Reconnect battery cables. Make sure water is supplied to cooling system and start
engine. Check for fuel leaks.
72678
a
c
b
a-Filter Base/Mounting Bracket
b-Filter Element
c-Sealing Ring
Index