Service manual

MERCARB 2 BARREL CARBURETOR
SERVICE MANUAL NUMBER 26
90-861329--1 MARCH 1999 Page 5B-9
Fuel Inlet Filter
NOTICE
Refer to “Precautions” in this section, BEFORE proceeding.
1. Remove in the following order:
a. Fuel line from fuel inlet filter nut.
b. Fuel inlet filter nut and small gasket.
c. Large gasket.
d. Filter.
e. Spring.
f. Small gasket - from inside filter nut.
72406
b
c
d
e
f
a
a-Fuel Line
b-Fuel Inlet Filter Nut
c-Gasket (Large)
d-Gasket (Small)
e-Filter
f-Spring
2. Clean filter nut and spring in solvent and dry with compressed air.
3. Install in the following order:
a. Spring - place in carburetor body.
b. Filter - open end to inlet filter nut.
c. Small gasket - place inside filter nut.
d. Large gasket - place over filter nut threads.
e. Fuel inlet filter nut - torque nut to 18 lb-ft (24 Nm).
f. Fuel line - torque to 18 lb-ft (24 Nm).
INDEX