Service manual

SEAWATER COOLED MODELS
SERVICE MANUAL NUMBER 26
90-861329--1 MARCH 1999 Page 6A-15
3. Cut hose for return fitting as shown below. Cut approximately 3/4 in. (19 mm) out of hose
to maintain proper hose configuration.
73572
a
Typical
a-Cut Hose at This Location
4. Install return fitting in hose and tighten hose clamps securely.
73572
a
Typical
a-Return Fitting
5. Connect hot water return hose to return fitting and tighten hose clamps securely.
6. Ensure that hoses do not rub or chafe against any engine components.
Index