Service manual

CLOSED COOLED MODELS
SERVICE MANUAL NUMBER 26
90-861329--1 MARCH 1999 Page 6B-13
If your engine is equipped with this device, follow this procedure:
1. Detach the hoses from the top fittings.
76243
a
a-Fittings
2. Lower hoses into bilge. If hoses have developed a “set,” T-handle retrieval tool can be
used to push hoses below their connection point.
76244
a
b
a-Hoses
b-Connection Points
IMPORTANT: Hoses must be lowered below their connection point on the engine in
order to drain completely.
3. If hoses do not drain, use wire to remove blockage.
4. Pull hoses back into original position after draining is complete. Reconnect to fittings.
Index