Service manual

MANIFOLD
SERVICE MANUAL NUMBER 26
90-861329--1 MARCH 1999 Page 7A-5
Upper Exhaust Pipe and Shutter Replacement
IMPORTANT: Engine does not have to be removed, however, exhaust elbow may have
to be removed.
1. Loosen exhaust bellows clamps.
2. Remove hose clamps.
3. Remove intermediate exhaust pipe.
4. Remove exhaust tube.
75819
a
c
b
a
a-Clamps
b-Lower Exhaust Tube
c-Intermediate Exhaust Pipe
5. Replace shutter (in lower pipe), as shown.
a. Slide hose on lower pipe. Tighten clamps securely.
b. Place clamps over bellows and connector hose, then install upper exhaust pipe.
c. Making sure all clamps are contacting exhaust elbow, upper pipe and lower pipe,
tighten clamps securely.
74552
a
c
d
b
a-Connector Hose - Remove to Change Shutter
b-Clamps (2)
c-Grommet (2)
d-Shutter - Opens Downward
INDEX