Service manual

MANIFOLD
SERVICE MANUAL NUMBER 26
90-861329--1 MARCH 1999 Page 7A-7
Emissions Testing
Installing Test Probes
IMPORTANT: The testing dealer or agency will be equipped with the appropriate test
equipment and adapters for this engine. The test probes should be installed as fol-
lows:
1. Remove plug from exhaust elbow.
74645
2. Install exhaust elbow adapter fitting into elbow. Apply Loctite Pipe Sealant with Teflon
to threads that go into elbow. Tighten it securely.
3. Insert exhaust probe into fitting and tighten securely.
71926
74644
The testing agency will connect their adapter and test equipment to the probe to conduct
the test. Once the test is complete, remove the test probe and fitting. Apply Quicksilver Per-
fect Seal to the threads of plug and reinstall into elbow.
INDEX