Service manual

MCM 3.0L (181 CID) - ALPHA DRIVE SERVICE MANUAL NUMBER 26
Page 2A-6 90-861329--1 MARCH 1999
9. Disconnect engine harness wires from shift cut-out switch harness.
75499
a
a-Shift Cutout Switch Wires
10. Disconnect MerCathode wires from MerCathode controller if equipped.
11. Disconnect seawater inlet hose from gimbal housing.
72614
b
a
c
a-Water Tube
b-Hose Clamp (Tighten Securely)
c-Water Hose
12. Loosen hose clamps and disconnect exhaust elbow hose.
13. Remove both shift cables from shift plate. Retain locknuts and hardware.
INDEX