User's Manual

Quantum 1000 Base Station User
7.
Position either the heavy duty HX
400/300 crimp tool directly behind and adjacent to the connector body, and crimp the connector.
The HX-
4 crimp tool automatically relea
8.
Position the heat shrink boot as far forward on the connector body as
with the coupling nut and use a heat gun to
Quantum 1000 Base Station User
Guide
Rev 1.1, Page
Position either the heavy duty HX
-4 crimp tool with the appropriate dies
(.429” hex) or the CT
400/300 crimp tool directly behind and adjacent to the connector body, and crimp the connector.
4 crimp tool automatically relea
ses when the crimp is complete.
Position the heat shrink boot as far forward on the connector body as
possible, without interfering
with the coupling nut and use a heat gun to
form a weather tight seal.
Rev 1.1, Page
68 of 70
(.429” hex) or the CT
-
400/300 crimp tool directly behind and adjacent to the connector body, and crimp the connector.
possible, without interfering