User's Manual Part 1

Quantum 1000 Base Station User
2.9.1
Weather Protection of the
An IP67 compliant weather protection connector is provided along with the Base Station Sector. This will
provide the means to weather protect the RJ45 Ethernet connection.
Figure 34
is an illustration of the components that are includ
Figure
Note:
Please remember to install all the pieces of the connector onto the cable before the RJ45
connector is crimped.
The procedure to install the connector is given below. The instructions are provided assuming that one of
the ends of the cable is accessible and does not have a RJ connector fitted.
1)
Crimp the RJ45 connector to the cable (figure 3
Quantum 1000 Base Station User
Guide
Rev 1.1, Page
Weather Protection of the
Ethernet Connector
An IP67 compliant weather protection connector is provided along with the Base Station Sector. This will
provide the means to weather protect the RJ45 Ethernet connection.
is an illustration of the components that are includ
ed in the protection connector.
Figure
34 – Ethernet Weather Connection
Please remember to install all the pieces of the connector onto the cable before the RJ45
The procedure to install the connector is given below. The instructions are provided assuming that one of
the ends of the cable is accessible and does not have a RJ connector fitted.
Crimp the RJ45 connector to the cable (figure 3
5).
Figure 35 – Cable RJ45 Connector
Rev 1.1, Page
34 of 70
An IP67 compliant weather protection connector is provided along with the Base Station Sector. This will
ed in the protection connector.
Please remember to install all the pieces of the connector onto the cable before the RJ45
The procedure to install the connector is given below. The instructions are provided assuming that one of